ABB repair in Belgium

ABB drives, repaired at component level

Xania Electronics repairs ABB low-voltage AC drives and DC drives in our workshop in Mouscron, Belgium, from the ACS355 and ACS550 to the ACS880, and the older ACS800 and ACS600. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Send us the type code from the rating label, such as ACS880-01-…, ACS550-01-… or DCS800-…, and the fault code on the control panel.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

ABB drives we repair

SeriesEquipmentType codes start with
ACS880Industrial driveACS880-…
ACS580General-purpose driveACS580-…
ACS550 / ACH550General-purpose and HVAC driveACS550-…ACH550-…
ACS355 / ACS310 / ACS150Machinery and compact drivesACS355-…ACS310-…ACS150-…
ACS800 / ACS600Older industrial drivesACS800-…ACS6…
DCS800 / DCS550DC drivesDCS800-…DCS550-…

Your type code isn’t listed? We also repair ABB control boards, power boards and option modules. Send us the type code and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on ABB drives

  • Worn DC bus capacitors on drives that have run for many years.
  • Shorted IGBTs or rectifier after a short circuit, an earth fault or a mains surge.
  • Failed internal power supply: blank control panel, no communication.
  • Worn cooling fans, followed by overtemperature trips.
  • Boards damaged by moisture or conductive dust.

Fault codes we see often

CodeSeriesMeaning
0001ACS550, ACS355Overcurrent
0002ACS550, ACS355DC overvoltage
0003ACS550, ACS355Drive overtemperature
0004ACS550, ACS355Short circuit
0016ACS550, ACS355Earth fault
2310ACS880Overcurrent
2330ACS880Earth leakage
3210ACS880DC link overvoltage
3220ACS880DC link undervoltage
4210ACS880IGBT overtemperature

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating or a dead unit with no power.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about ABB repairs

Will my parameters be kept?

Save the parameters before shipping if you can: the assistant control panel can store a copy, or use Drive Composer, or DriveWindow on older drives. If parameters need restoring on the machine, we can do that on site.

Can you still repair the ACS800 and ACS600?

Yes. Repairing an older drive usually avoids replacing it and changing the cabinet and the parameter set.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the type code and the fault code

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with ABB. ABB is a trademark of the ABB Group, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X