Danfoss and VACON repair in Belgium

Danfoss VLT and VACON drives, repaired at component level

Xania Electronics repairs Danfoss VLT and VACON frequency converters in our workshop in Mouscron, Belgium: FC 302, FC 202, FC 102, the older VLT 5000 and VLT 2800, and VACON NXS and NXP. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Pump or fan stopped? Send us the type code from the nameplate, such as FC-302P…, VLT5… or NXP…, and the alarm number on the display.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Danfoss series we repair

SeriesEquipmentType codes start with
VLT AutomationDrive FC 301 / FC 302Industrial frequency converterFC-301…FC-302…
VLT AQUA Drive FC 202Pumps, water and wastewaterFC-202…
VLT HVAC Drive FC 102Ventilation and air conditioningFC-102…
VLT Micro Drive FC 51Low-power frequency converterFC-051…
VLT 5000 / 6000 / 8000Older industrial and HVAC seriesVLT5…VLT6…VLT8…
VLT 2800Older compact seriesVLT28…
VACON NXS / NXPIndustrial frequency converterNXS…NXP…
VACON 100Industrial and HVAC frequency converterVACON0100…

Your type code isn’t listed? We also repair Danfoss control cards, option cards and power modules. Send us the type code and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Danfoss units

  • Worn DC bus capacitors, especially on VLT 5000 and VLT 2800 units.
  • Shorted IGBT or rectifier modules after a short circuit, a ground fault or a mains surge.
  • Failed power card or internal supply: blank LCP keypad.
  • Worn cooling fans, followed by heatsink overtemperature trips.
  • Boards damaged by moisture, common in pumping stations.

Alarms we see often

CodeSeriesMeaning
Alarm 7VLT FC seriesDC overvoltage
Alarm 8VLT FC seriesDC undervoltage
Alarm 13VLT FC seriesOvercurrent
Alarm 14VLT FC seriesEarth (ground) fault
Alarm 16VLT FC seriesShort circuit
Alarm 29VLT FC seriesHeatsink temperature
F1VACON NXOvercurrent
F2VACON NXOvervoltage
F3VACON NXEarth fault
F9VACON NXUndervoltage
F14VACON NXUnit overtemperature

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating or a dead unit with no power.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Danfoss repairs

Can you repair the VLT 5000 and VLT 2800?

Yes. For these older series, repair usually avoids replacing the drive and changing the cabinet wiring.

Do you repair VACON drives too?

Yes. VACON is part of the Danfoss group, and we repair VACON NXS, NXP and VACON 100.

Will my parameters be kept?

Save the parameter set before shipping if you can: the graphical LCP keypad can store a copy, or use MCT 10. If parameters need restoring on the machine, we can do that on site.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the type code and the alarm number

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with the Danfoss group. Danfoss, VLT and VACON are trademarks of the Danfoss group, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X