Lenze repair in Belgium

Lenze inverters and servo drives, repaired at component level

Xania Electronics repairs Lenze frequency inverters and servo drives in our workshop in Mouscron, Belgium, from the older 8200 vector and 9300 to the 9400, 8400 and i500. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Lenze drives run many packaging machines, conveyors and intralogistics lines. Send us the type code from the nameplate, such as E82EV…, EVS93… or E84AV…, and the fault message on the keypad.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Lenze series we repair

SeriesEquipmentType codes start with
8200 vectorFrequency inverterE82EV…
9300 Servo / 9300 VectorServo inverter, frequency inverterEVS93…EVF93…
9400Servo inverterE94A…
8400 StateLine / HighLine / TopLineFrequency inverterE84AV…
i500 (i510, i550)Frequency inverterI5…
ECSMulti-axis servo systemECS…

Your type code isn’t listed? We also repair older Lenze communication modules and control boards. Send us the type code and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Lenze units

  • Worn DC bus capacitors on 8200 vector and 9300 units after years in service.
  • Shorted power stage (IGBTs) after a short circuit or a motor cable fault.
  • Failed internal power supply: keypad or status LEDs dark, no communication.
  • Faulty fieldbus module or control board.
  • Overtemperature trips caused by a blocked fan or a clogged heatsink.

Fault messages we see often

CodeSeriesMeaning
OC18200 vector, 9300Short circuit
OC28200 vector, 9300Earth fault
OU8200 vector, 9300DC bus overvoltage
LU8200 vector, 9300DC bus undervoltage
OH8200 vector, 9300Heatsink overtemperature

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating or a dead unit with no power.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Lenze repairs

Can you still repair the 9300 and 8200 vector?

Yes. Both are older series that still run on many machines. Repairing the existing drive avoids replacing it and re-parameterising the machine.

Will my parameters be kept?

Save the parameter set before shipping if you can, with Global Drive Control, Lenze Engineer or the keypad. If parameters need restoring on the machine, we can do that on site.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the type code and the fault message

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with Lenze SE. Lenze and the series names mentioned are trademarks of Lenze SE, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X