Fanuc amplifiers and CNC units, repaired at component level
Xania Electronics repairs Fanuc servo amplifiers, spindle amplifiers, power supply modules, CNC units and control boards in our workshop in Mouscron, Belgium. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.
Machine down? Send us the part number from the label, starting with A06B, A02B, A16B or A20B, and the alarm shown on the CNC screen or on the amplifier display.
- Quote
- Within 5 working days, or 2 with expedite
- Warranty
- 1 year on every repair
- Return shipping
- Included for Belgium and northern France
Fanuc equipment we repair
| Series | Equipment | Part numbers start with |
|---|---|---|
| αi series (alpha i) | Servo amplifiers (αiSV), spindle amplifiers (αiSP), power supplies (αiPS) | A06B-6… |
| βi series (beta i) | Servo amplifiers (βiSV), servo and spindle units (βiSVSP) | A06B-6… |
| α series (alpha) | Older servo, spindle and power supply modules (SVM, SPM, PSM) | A06B-6… |
| Series 0i, 16i, 18i, 21i | CNC units and control boards | A02B-…A16B-…A20B-… |
| Series 30i, 31i, 32i | CNC units and control boards | A02B-…A16B-…A20B-… |
Your part number isn’t listed? We repair at component level, so the age of a unit rarely rules it out. Send us the part number and we’ll confirm.
Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.
Common faults on Fanuc units
- Shorted power modules (IPM or IGBT) in servo and spindle amplifiers after a motor or cable fault.
- Worn DC link capacitors in power supply modules.
- Failed control power supply in an amplifier: no status display.
- Dark CNC screen: failed LCD backlight or display unit.
- Failed CNC power supply unit, or a control board damaged by coolant mist or conductive dust.
CNC alarms we see often
| Alarm | Series | Meaning |
|---|---|---|
| SV0401 | 30i, 0i-D, 0i-F | Servo V-ready off: the amplifier is not ready |
| SV0411 | 30i, 0i-D, 0i-F | Excess position error while the axis moves |
| SV0430 | 30i, 0i-D, 0i-F | Servo motor overheat |
| SV0433 | 30i, 0i-D, 0i-F | Low DC link voltage on the power supply |
| SV0436 | 30i, 0i-D, 0i-F | Soft thermal (OVC): motor overcurrent over time |
| SV0438 | 30i, 0i-D, 0i-F | Abnormal current in the amplifier inverter |
An alarm shows where the system stopped, not always what failed. A servo alarm can come from the amplifier, the motor, the feedback cable or the mechanics. We check for that and note it in the repair report.
Start a request for: overcurrent alarms, voltage alarms, overheating, a dark CNC screen or a dead unit.
How a repair works
Send the unit
Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the alarm number and the axis if you have them.
Diagnosis and quote
We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.
Repair and test
Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.
Return
The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.
How pricing works
| Item | Price |
|---|---|
| Repair | Fixed price per unit, parts included, quoted after diagnosis |
| Diagnosis when you accept the quote | Included in the repair price |
| Diagnosis when you decline the quote or the unit can’t be repaired | Fixed fee by type of unit, shown in the repair request form |
| Expedite: quote in 2 working days | Optional supplement, shown in the repair request form |
| Return shipping to Belgium and northern France | Included |
Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.
Alarm on the machine but no obvious culprit?
Servo and spindle alarms can come from the motor, the feedback cabling or the mechanics as well as the amplifier. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.
Questions about Fanuc repairs
Will my CNC parameters and programs be kept?
Back up the SRAM, parameters and part programs to a memory card before removing a CNC unit or a control board: they are held in battery-backed memory that can be lost when the unit is disconnected. Amplifiers do not store the machine parameters.
Can you repair the older α series?
Yes. The α series is no longer current, but we repair its servo, spindle and power supply modules at component level, which avoids changing the amplifiers and the cabinet wiring.
Do you take units from outside Belgium?
Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.
Send us the part number and the alarm
We’ll tell you whether we repair that unit and what happens next.
Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, BelgiumMobile +32 470 61 37 94 · Landline +32 56 55 46 02
Xania Electronics is an independent repair service and is not affiliated with FANUC Corporation. FANUC is a trademark of FANUC Corporation, used here only to identify the equipment we repair.