Bosch Rexroth repair in Belgium

Bosch Rexroth drives, repaired at component level

Xania Electronics repairs Bosch Rexroth (Indramat) servo drives, spindle drives, power supplies and frequency converters in our workshop in Mouscron, Belgium, from the older DIAX and EcoDrive to IndraDrive. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Send us the type code from the nameplate, such as HCS02…, HMS01…, DKC… or HDS…, and the diagnostic message on the display.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Bosch Rexroth equipment we repair

SeriesEquipmentType codes start with
IndraDrive C / CsCompact convertersHCS01…HCS02…HCS03…
IndraDrive MModular inverters and power suppliesHMS01…HMD01…HMV01…
EcoDrive 03 / EcoDrive CsOlder compact servo drivesDKC…
DIAX03 / DIAX04Older modular servo and spindle drives, power suppliesDDS…HDS…HDD…HVE…HVR…
EFC 3610 / EFC 5610Frequency convertersEFC…
Fv seriesOlder frequency convertersFVCA…

Your type code isn’t listed? We repair at component level, so the age of a unit rarely rules it out. Send us the type code and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Bosch Rexroth units

  • Shorted power stage after a motor, cable or earth fault.
  • Worn DC bus capacitors in drives and power supply modules.
  • Failed internal power supply: blank display, no communication.
  • Worn cooling fans, followed by amplifier overtemperature shutdowns.
  • Feedback interface faults, often after encoder cable damage.

Diagnostic codes we see often

CodeSeriesMeaning
F8060IndraDriveOvercurrent in power section
F2026IndraDriveUndervoltage in power section
F218EcoDrive, DIAX04Amplifier overtemperature
F219EcoDrive, DIAX04Motor overtemperature
F226EcoDrive, DIAX04Undervoltage in power section
F860EcoDrive, DIAX04Overcurrent: short circuit in the power stage

A diagnostic code shows where the drive stopped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor, the encoder cable or the wiring. We check for that and note it in the repair report.

Start a request for: overcurrent errors, voltage errors, overheating or a dead unit with no power.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the diagnostic code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows on the machine?

Some faults only appear with the real load, the encoder cabling or the grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Bosch Rexroth repairs

Will my parameters be kept?

Save the parameters before shipping if you can, with IndraWorks for IndraDrive or DriveTop for EcoDrive and DIAX. If the drive has a programming module or memory card, mention it in your repair request. If parameters need restoring on the machine, we can do that on site.

Can you still repair DIAX and EcoDrive?

Yes. These older Indramat series still run on many machines. Repairing the existing drive avoids replacing it and recommissioning the axis.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the type code and the diagnostic code

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with Bosch Rexroth AG. Bosch Rexroth, Rexroth, Indramat, IndraDrive, EcoDrive and DIAX are trademarks of Bosch Rexroth AG, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X