Schneider Electric repair in Belgium

Schneider Electric drives, PLCs and HMIs, repaired at component level

Xania Electronics repairs Schneider Electric Altivar frequency converters, Lexium servo drives, Modicon PLC modules and Magelis operator panels in our workshop in Mouscron, Belgium. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Send us the reference from the label, such as ATV71H…, ATV320…, LXM32… or BMX…, and the fault code on the display.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Schneider Electric equipment we repair

SeriesEquipmentReferences start with
Altivar 61 / 71Pump and fan drives, high-performance drivesATV61…ATV71…
Altivar 31 / 312 / 320Compact frequency convertersATV31…ATV312…ATV320…
Altivar Process 630 / 930Process drivesATV630…ATV930…
Lexium 32 / Lexium 05Servo drivesLXM32…LXM05…
Modicon M340 / M580 / PremiumPLC CPUs, I/O and power supply modulesBMX…BME…TSX…
Magelis / HarmonyOperator panelsXBTGT…HMIGTO…

Your reference isn’t listed? We repair at component level, so the age of a unit rarely rules it out. Send us the reference and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Schneider Electric units

  • Worn DC bus capacitors on Altivar drives that have run for many years.
  • Shorted IGBTs after a motor, cable or earth fault.
  • Failed internal power supply: blank display, no communication.
  • Worn cooling fans, followed by drive overheat trips.
  • Failed touch screen or backlight on Magelis panels.

Altivar fault codes we see often

CodeSeriesMeaning
OCFAltivar 61 / 71Overcurrent
SCF1Altivar 61 / 71Motor short circuit
SCF3Altivar 61 / 71Ground short circuit
OSFAltivar 61 / 71Mains overvoltage
USFAltivar 61 / 71Undervoltage
OHFAltivar 61 / 71Drive overheat
ObFAltivar 61 / 71Overbraking: DC bus overvoltage during deceleration
CnFAltivar 61 / 71Communication network fault

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor, the cabling or the deceleration settings. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating, a faulty HMI display or a dead unit.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Schneider Electric repairs

Will my parameters or PLC program be kept?

We don’t change your drive configuration or your PLC program. Still, save a copy before shipping: the Altivar graphic display terminal or SoMove for drives, your engineering software for Modicon PLCs. If settings need restoring on the machine, we can do that on site.

Can you still repair the Altivar 71 and Altivar 31?

Yes. Repairing an older drive usually avoids replacing it and changing the cabinet wiring.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the reference and the fault code

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with Schneider Electric. Schneider Electric, Altivar, Lexium, Modicon, Magelis and Harmony are trademarks of Schneider Electric, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X