Siemens repair in Belgium

Siemens drives and PLCs, repaired at component level

Xania Electronics repairs Siemens frequency converters, servo drives, DC drives and Simatic PLC modules in our workshop in Mouscron, Belgium. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Line down? Send us the order number from the nameplate, starting with 6SE, 6SL, 6SN, 6RA or 6ES, and the fault code shown on the display.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Siemens series we repair

SeriesEquipmentOrder numbers start with
SIMOVERT Masterdrives VC / MCFrequency converter, servo drive6SE70…
Micromaster 420 / 430 / 440Frequency converter6SE6420…6SE6430…6SE6440…
Sinamics G120, G120C, V20Frequency converter6SL3…
Sinamics S120Modular drive system6SL3…
Simodrive 611Servo drive for machine tools6SN11…
Simoreg DC MasterDC drive6RA70…
Simatic S7-300 / S7-400PLC: CPUs, I/O modules, power supplies6ES7…

Your order number isn’t listed? We repair at component level, so the age of a unit rarely rules it out. Send us the order number and we’ll confirm.

Order numbers with their own page: 6SE6440-2UD24-0BA1, Micromaster 440, 4 kW.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Siemens units

  • Worn DC bus capacitors, especially on Masterdrives and Micromaster units that have run for more than ten years.
  • Shorted IGBT modules after a motor, cable or ground fault.
  • Failed internal switch-mode supply: dark display, no communication.
  • Blocked or worn cooling fans, followed by overtemperature trips.
  • Control boards damaged by voltage spikes, moisture or conductive dust.

Fault codes we see often

CodeSeriesMeaning
F0001Micromaster 4Overcurrent
F0002Micromaster 4Overvoltage
F0003Micromaster 4Undervoltage
F0004Micromaster 4Inverter overtemperature
F30001SinamicsPower unit overcurrent
F006MasterdrivesDC link overvoltage
F011MasterdrivesOvercurrent

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating or a dead unit with no power.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Siemens repairs

Can you still repair Masterdrives?

Yes. Masterdrives is no longer sold, but we repair it at component level. Keeping the existing drive avoids re-engineering the cabinet and recommissioning the machine, which is usually faster and cheaper than migrating to Sinamics.

Will my parameters or PLC program be kept?

We don’t change your PLC program or your drive parameters. Still, save a copy before shipping: replacing components on a CPU or a control board can clear its memory. Use your engineering software, or the operator panel on drives. If parameters need restoring on the machine, we can do that on site.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the order number and the fault code

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with Siemens AG. Siemens, SIMOVERT, MICROMASTER, SINAMICS, SIMODRIVE, SIMOREG and SIMATIC are trademarks of Siemens AG, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X