Allen-Bradley repair in Belgium

Allen-Bradley drives, PLCs and HMIs, repaired at component level

Xania Electronics repairs Allen-Bradley PowerFlex AC drives, Kinetix servo drives, ControlLogix, CompactLogix and SLC 500 PLC modules and PanelView operator panels in our workshop in Mouscron, Belgium. Every unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.

Send us the catalog number from the label, such as 25B-…, 20G…, 2198-…, 1756-… or 2711P-…, and the fault code shown on the display.

Quote
Within 5 working days, or 2 with expedite
Warranty
1 year on every repair
Return shipping
Included for Belgium and northern France

Allen-Bradley equipment we repair

SeriesEquipmentCatalog numbers start with
PowerFlex 4 / 40 / 400Compact AC drives22A-…22B-…22C-…
PowerFlex 523 / 525Compact AC drives25A-…25B-…
PowerFlex 70 / 700AC drives20A…20B…
PowerFlex 753 / 755Architecture-class AC drives20F…20G…
Kinetix 300 / 350, 5500 / 5700, 6000 / 6200 / 6500Servo drives2097-…2198-…2094-…
ControlLogix / CompactLogixPLC CPUs, I/O and communication modules1756-…1769-…5069-…
SLC 500 / MicroLogix / PLC-5Older PLC modules1746-…1747-…1761 to 1766…1771-…
PanelView Plus / Component / StandardOperator panels2711P-…2711C-…2711-…

Your catalog number isn’t listed? We repair at component level, so the age of a unit rarely rules it out. Send us the catalog number and we’ll confirm.

Need a replacement instead? We can source new, refurbished or exchange units and confirm availability, condition and price, usually within one business day. Build a request for quote.

Common faults on Allen-Bradley units

  • Shorted IGBTs after a motor, cable or ground fault.
  • Worn DC bus capacitors on PowerFlex drives that have run for many years.
  • Failed internal power supply: blank HIM or display, no communication.
  • Worn cooling fans, followed by heatsink overtemperature trips.
  • Dark screen, failed backlight or unresponsive touch on PanelView panels.

PowerFlex fault codes we see often

CodeSeriesMeaning
F004PowerFlex 4, 40, 525Undervoltage
F005PowerFlex 4, 40, 525Overvoltage
F007PowerFlex 4, 40, 525Motor overload
F008PowerFlex 4, 40, 525Heatsink overtemperature
F012PowerFlex 4, 40, 525Hardware overcurrent
F013PowerFlex 4, 40, 525Ground fault
F064PowerFlex 4, 40, 525Drive overload

A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.

Start a request for: overcurrent trips, voltage trips, overheating, a faulty PanelView display or a dead unit.

How a repair works

  1. Send the unit

    Start a repair request to get your case reference, then ship the unit, at your cost, to Rue du Général Fleury 29, 7700 Mouscron with that reference written on the unit and on the box. Add the fault code if you have it.

  2. Diagnosis and quote

    We trace the fault to the failed component and send you a fixed-price quote within 5 working days, or 2 with expedite. Nothing is repaired without your approval.

  3. Repair and test

    Failed components are replaced, then the unit is cleaned, checked and functionally tested before it leaves the workshop. Burn-in testing is available on request.

  4. Return

    The unit ships back with a full repair report and a 1-year warranty. Return shipping is included for Belgium and northern France.

How pricing works

ItemPrice
RepairFixed price per unit, parts included, quoted after diagnosis
Diagnosis when you accept the quoteIncluded in the repair price
Diagnosis when you decline the quote or the unit can’t be repairedFixed fee by type of unit, shown in the repair request form
Expedite: quote in 2 working daysOptional supplement, shown in the repair request form
Return shipping to Belgium and northern FranceIncluded

Nothing is repaired without your approval: you first receive a fixed quote for the unit. If a diagnosis needs more time, we contact you first and continue only with your approval. All prices are final, with no VAT added (small business VAT exemption). No diagnosis fee applies when the damage is obvious on arrival, for example visibly burnt components. Read the full repair conditions.

Line down and the fault only shows in the cabinet?

Some faults only appear with the real load, wiring or grounding of your installation. We can send an engineer to your site, typically within 24 to 48 hours, depending on severity and availability.

Book on-site service

Questions about Allen-Bradley repairs

Will my parameters or PLC program be kept?

We don’t change your drive parameters or your PLC program. Still, save a copy before shipping: Connected Components Workbench or the HIM for PowerFlex drives, Studio 5000 or RSLogix for PLCs, and your HMI application for PanelView panels. If settings need restoring on the machine, we can do that on site.

Can you still repair SLC 500 and PowerFlex 70 units?

Yes. Older series still run on many machines. Repairing the existing unit avoids a migration of the cabinet and the program.

Do you take units from outside Belgium?

Yes. Return shipping is included for Belgium and northern France. For other destinations it is charged at cost.

Send us the catalog number and the fault code

We’ll tell you whether we repair that unit and what happens next.

Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, Belgium
Mobile +32 470 61 37 94 · Landline +32 56 55 46 02

Xania Electronics is an independent repair service and is not affiliated with Rockwell Automation. Allen-Bradley, PowerFlex, Kinetix, ControlLogix, CompactLogix, SLC, MicroLogix, PLC-5 and PanelView are trademarks of Rockwell Automation, used here only to identify the equipment we repair.

Share LinkedIn WhatsApp X